{ "api_version": "1", "kind": "dse_post", "self": "https://update.dsesecurity.com/api/v1/posts/plan-on-site-recovery-before-disabling-teleport-for-remote-protect-cameras/", "item": { "id": "https://update.dsesecurity.com/updates/plan-on-site-recovery-before-disabling-teleport-for-remote-protect-cameras/", "slug": "plan-on-site-recovery-before-disabling-teleport-for-remote-protect-cameras", "url": "https://update.dsesecurity.com/updates/plan-on-site-recovery-before-disabling-teleport-for-remote-protect-cameras/", "alternate_urls": { "markdown": "https://update.dsesecurity.com/updates/plan-on-site-recovery-before-disabling-teleport-for-remote-protect-cameras.md", "json": "https://update.dsesecurity.com/api/v1/posts/plan-on-site-recovery-before-disabling-teleport-for-remote-protect-cameras/" }, "title": "Plan on-site recovery before disabling Teleport for remote Protect cameras", "summary": "Identify the technician and on-site recovery path before changing the remote cameras’ Teleport dependency.", "format": { "slug": "guide", "name": "Guide" }, "priority": { "slug": "info", "name": "Information" }, "featured": false, "image": { "theme": "physical-security", "label": "Physical security", "alt": "Integrated video surveillance and controlled entry at a modern commercial facility.", "card_url": "https://update.dsesecurity.com/assets/editorial/physical-security-card.webp?v=1.8.20", "hero_url": "https://update.dsesecurity.com/assets/editorial/physical-security-hero.webp?v=1.8.20", "social_url": "https://update.dsesecurity.com/assets/editorial/physical-security-social-v2.jpg?v=1.8.20", "width": 2400, "height": 1350 }, "topics": [ { "slug": "video-surveillance", "name": "Video Surveillance", "url": "https://update.dsesecurity.com/topic/video-surveillance/" } ], "author": { "name": "DSE Security Editorial Team", "url": "https://update.dsesecurity.com/#editorial-team", "type": "Organization" }, "publisher": { "name": "Detection Systems & Engineering", "url": "https://dsesecurity.com/" }, "published_at": "2026-10-15T13:32:14+00:00", "modified_at": "2026-10-15T13:36:14+00:00", "reviewed_on": "2026-10-15", "reading_minutes": 2, "word_count": 270, "potentially_affected": "Applies to Protect Teleport Adoption and the supported models listed in the current guide. Do not assume older or third-party cameras qualify, or that every camera has local edge-recording capability.", "dse_recommendation": "DSE recommends treating the Teleport setting as a recording dependency in the change inventory.", "primary_source": { "name": "Ubiquiti Help Center — UniFi Protect: Teleport Adoption", "url": "https://help.ui.com/hc/en-us/articles/43693427639319-UniFi-Protect-Teleport-Adoption", "published_on": null, "authority": "help.ui.com" }, "publishing_principles": "https://update.dsesecurity.com/updates/dse-updates-editorial-methodology/", "usage_info": "https://update.dsesecurity.com/usage/", "copyright_notice": "Copyright © 2026 Detection Systems & Engineering. All rights reserved.", "content_html": "

Identify the technician and on-site recovery path before changing the remote cameras’ Teleport dependency.

\n

Source facts

\n

UniFi Protect Teleport Adoption records a remote camera to a destination gateway or NVR across the internet. The guide requires supported cameras, specified minimum software versions, a direct Teleport connection, and an administrator on both destination devices. It warns that disabling Teleport disconnects remote cameras and stops their recording to that destination. Turning it back on does not automatically reconnect them: setup must be repeated from the camera’s location. Already locally adopted cameras require a factory reset to switch to Teleport.

\n

Source: Ubiquiti Help Center — UniFi Protect: Teleport Adoption.

\n

Applicability

\n

Applies to Protect Teleport Adoption and the supported models listed in the current guide. Do not assume older or third-party cameras qualify, or that every camera has local edge-recording capability.

\n

DSE recommendation

\n

DSE recommends treating the Teleport setting as a recording dependency in the change inventory. Before disabling it or rebuilding the destination, identify remote entrances, on-site contacts, and an approved recovery visit. Agree which clips need preservation before any factory-reset transition and document the intended recording destination. Include uplink demand and outage expectations in the design review. Keep a local recovery procedure available to the technician who can physically reach the camera.

\n

Verification

\n

Pilot the approved adoption workflow at a non-critical camera and confirm the selected recorder receives new footage. Record camera and destination versions and supported features. Rehearse the recovery steps as a planned test rather than disabling Teleport on production cameras without on-site assistance and an accepted recording interruption.

\n

Official reference

\n

Ubiquiti Help Center — UniFi Protect: Teleport Adoption. Reviewed October 15, 2026.

", "content_text": "Identify the technician and on-site recovery path before changing the remote cameras’ Teleport dependency.\nSource facts\nUniFi Protect Teleport Adoption records a remote camera to a destination gateway or NVR across the internet. The guide requires supported cameras, specified minimum software versions, a direct Teleport connection, and an administrator on both destination devices. It warns that disabling Teleport disconnects remote cameras and stops their recording to that destination. Turning it back on does not automatically reconnect them: setup must be repeated from the camera’s location. Already locally adopted cameras require a factory reset to switch to Teleport.\nSource: Ubiquiti Help Center — UniFi Protect: Teleport Adoption.\nApplicability\nApplies to Protect Teleport Adoption and the supported models listed in the current guide. Do not assume older or third-party cameras qualify, or that every camera has local edge-recording capability.\nDSE recommendation\nDSE recommends treating the Teleport setting as a recording dependency in the change inventory. Before disabling it or rebuilding the destination, identify remote entrances, on-site contacts, and an approved recovery visit. Agree which clips need preservation before any factory-reset transition and document the intended recording destination. Include uplink demand and outage expectations in the design review. Keep a local recovery procedure available to the technician who can physically reach the camera.\nVerification\nPilot the approved adoption workflow at a non-critical camera and confirm the selected recorder receives new footage. Record camera and destination versions and supported features. Rehearse the recovery steps as a planned test rather than disabling Teleport on production cameras without on-site assistance and an accepted recording interruption.\nOfficial reference\nUbiquiti Help Center — UniFi Protect: Teleport Adoption. Reviewed October 15, 2026.", "content_markdown": "Identify the technician and on-site recovery path before changing the remote cameras’ Teleport dependency.\n\n## Source facts\n\nUniFi Protect Teleport Adoption records a remote camera to a destination gateway or NVR across the internet. The guide requires supported cameras, specified minimum software versions, a direct Teleport connection, and an administrator on both destination devices. It warns that disabling Teleport disconnects remote cameras and stops their recording to that destination. Turning it back on does not automatically reconnect them: setup must be repeated from the camera’s location. Already locally adopted cameras require a factory reset to switch to Teleport.\n\nSource: [Ubiquiti Help Center — UniFi Protect: Teleport Adoption](https://help.ui.com/hc/en-us/articles/43693427639319-UniFi-Protect-Teleport-Adoption).\n\n## Applicability\n\nApplies to Protect Teleport Adoption and the supported models listed in the current guide. Do not assume older or third-party cameras qualify, or that every camera has local edge-recording capability.\n\n## DSE recommendation\n\nDSE recommends treating the Teleport setting as a recording dependency in the change inventory. Before disabling it or rebuilding the destination, identify remote entrances, on-site contacts, and an approved recovery visit. Agree which clips need preservation before any factory-reset transition and document the intended recording destination. Include uplink demand and outage expectations in the design review. Keep a local recovery procedure available to the technician who can physically reach the camera.\n\n## Verification\n\nPilot the approved adoption workflow at a non-critical camera and confirm the selected recorder receives new footage. Record camera and destination versions and supported features. Rehearse the recovery steps as a planned test rather than disabling Teleport on production cameras without on-site assistance and an accepted recording interruption.\n\n## Official reference\n\n[Ubiquiti Help Center — UniFi Protect: Teleport Adoption](https://help.ui.com/hc/en-us/articles/43693427639319-UniFi-Protect-Teleport-Adoption). Reviewed October 15, 2026." }, "json_ld": { "@context": "https://schema.org", "@graph": [ { "@type": "Organization", "@id": "https://dsesecurity.com/#organization", "name": "Detection Systems & Engineering", "alternateName": "DSE Security", "url": "https://dsesecurity.com/", "logo": { "@type": "ImageObject", "url": "https://update.dsesecurity.com/assets/dse-logo-20260812.png?v=1.8.20" } }, { "@type": "Organization", "@id": "https://update.dsesecurity.com/#editorial-team", "name": "DSE Security Editorial Team", "url": "https://update.dsesecurity.com/", "parentOrganization": { "@id": "https://dsesecurity.com/#organization" } }, { "@type": "WebSite", "@id": "https://update.dsesecurity.com/#website", "name": "DSE Updates", "alternateName": "DSE Security Knowledge Hub", "url": "https://update.dsesecurity.com/", "inLanguage": "en-US", "publisher": { "@id": "https://dsesecurity.com/#organization" }, "potentialAction": { "@type": "SearchAction", "target": { "@type": "EntryPoint", "urlTemplate": "https://update.dsesecurity.com/?q={search_term_string}" }, "query-input": "required name=search_term_string" } }, { "@type": "WebPage", "@id": "https://update.dsesecurity.com/updates/plan-on-site-recovery-before-disabling-teleport-for-remote-protect-cameras/", "url": "https://update.dsesecurity.com/updates/plan-on-site-recovery-before-disabling-teleport-for-remote-protect-cameras/", "isPartOf": { "@id": "https://update.dsesecurity.com/#website" }, "lastReviewed": "2026-10-15" }, { "@type": "BreadcrumbList", "@id": "https://update.dsesecurity.com/updates/plan-on-site-recovery-before-disabling-teleport-for-remote-protect-cameras/#breadcrumbs", "itemListElement": [ { "@type": "ListItem", "position": 1, "name": "DSE Updates", "item": "https://update.dsesecurity.com/" }, { "@type": "ListItem", "position": 2, "name": "Plan on-site recovery before disabling Teleport for remote Protect cameras", "item": "https://update.dsesecurity.com/updates/plan-on-site-recovery-before-disabling-teleport-for-remote-protect-cameras/" } ] }, { "@type": [ "Article", "TechArticle" ], "@id": "https://update.dsesecurity.com/updates/plan-on-site-recovery-before-disabling-teleport-for-remote-protect-cameras/#article", "identifier": "https://update.dsesecurity.com/updates/plan-on-site-recovery-before-disabling-teleport-for-remote-protect-cameras/", "url": "https://update.dsesecurity.com/updates/plan-on-site-recovery-before-disabling-teleport-for-remote-protect-cameras/", "headline": "Plan on-site recovery before disabling Teleport for remote Protect cameras", "description": "Identify the technician and on-site recovery path before changing the remote cameras’ Teleport dependency.", "abstract": "Identify the technician and on-site recovery path before changing the remote cameras’ Teleport dependency.", "articleBody": "Identify the technician and on-site recovery path before changing the remote cameras’ Teleport dependency.\nSource facts\nUniFi Protect Teleport Adoption records a remote camera to a destination gateway or NVR across the internet. The guide requires supported cameras, specified minimum software versions, a direct Teleport connection, and an administrator on both destination devices. It warns that disabling Teleport disconnects remote cameras and stops their recording to that destination. Turning it back on does not automatically reconnect them: setup must be repeated from the camera’s location. Already locally adopted cameras require a factory reset to switch to Teleport.\nSource: Ubiquiti Help Center — UniFi Protect: Teleport Adoption.\nApplicability\nApplies to Protect Teleport Adoption and the supported models listed in the current guide. Do not assume older or third-party cameras qualify, or that every camera has local edge-recording capability.\nDSE recommendation\nDSE recommends treating the Teleport setting as a recording dependency in the change inventory. Before disabling it or rebuilding the destination, identify remote entrances, on-site contacts, and an approved recovery visit. Agree which clips need preservation before any factory-reset transition and document the intended recording destination. Include uplink demand and outage expectations in the design review. Keep a local recovery procedure available to the technician who can physically reach the camera.\nVerification\nPilot the approved adoption workflow at a non-critical camera and confirm the selected recorder receives new footage. Record camera and destination versions and supported features. Rehearse the recovery steps as a planned test rather than disabling Teleport on production cameras without on-site assistance and an accepted recording interruption.\nOfficial reference\nUbiquiti Help Center — UniFi Protect: Teleport Adoption. Reviewed October 15, 2026.", "datePublished": "2026-10-15T13:32:14+00:00", "dateModified": "2026-10-15T13:36:14+00:00", "mainEntityOfPage": { "@id": "https://update.dsesecurity.com/updates/plan-on-site-recovery-before-disabling-teleport-for-remote-protect-cameras/" }, "inLanguage": "en-US", "isAccessibleForFree": true, "author": { "@type": "Organization", "name": "DSE Security Editorial Team", "url": "https://update.dsesecurity.com/#editorial-team" }, "publisher": { "@id": "https://dsesecurity.com/#organization" }, "image": { "@type": "ImageObject", "@id": "https://update.dsesecurity.com/updates/plan-on-site-recovery-before-disabling-teleport-for-remote-protect-cameras/#primaryimage", "url": "https://update.dsesecurity.com/assets/editorial/physical-security-social-v2.jpg?v=1.8.20", "contentUrl": "https://update.dsesecurity.com/assets/editorial/physical-security-social-v2.jpg?v=1.8.20", "width": 1200, "height": 630, "caption": "Plan on-site recovery before disabling Teleport for remote Protect cameras" }, "articleSection": [ "Video Surveillance" ], "keywords": [ "Video Surveillance", "Guide", "Information priority" ], "genre": "Guide", "about": [ { "@type": "Thing", "name": "Video Surveillance", "url": "https://update.dsesecurity.com/topic/video-surveillance/" } ], "wordCount": 270, "timeRequired": "PT2M", "publishingPrinciples": "https://update.dsesecurity.com/updates/dse-updates-editorial-methodology/", "usageInfo": "https://update.dsesecurity.com/usage/", "copyrightHolder": { "@id": "https://dsesecurity.com/#organization" }, "copyrightNotice": "Copyright © 2026 Detection Systems & Engineering. All rights reserved.", "citation": { "@type": "CreativeWork", "name": "Ubiquiti Help Center — UniFi Protect: Teleport Adoption", "url": "https://help.ui.com/hc/en-us/articles/43693427639319-UniFi-Protect-Teleport-Adoption" } } ] } }