{
    "api_version": "1",
    "kind": "dse_post",
    "self": "https://update.dsesecurity.com/api/v1/posts/test-automatic-access-doors-in-power-off-and-emergency-modes/",
    "item": {
        "id": "https://update.dsesecurity.com/updates/test-automatic-access-doors-in-power-off-and-emergency-modes/",
        "slug": "test-automatic-access-doors-in-power-off-and-emergency-modes",
        "url": "https://update.dsesecurity.com/updates/test-automatic-access-doors-in-power-off-and-emergency-modes/",
        "alternate_urls": {
            "markdown": "https://update.dsesecurity.com/updates/test-automatic-access-doors-in-power-off-and-emergency-modes.md",
            "json": "https://update.dsesecurity.com/api/v1/posts/test-automatic-access-doors-in-power-off-and-emergency-modes/"
        },
        "title": "Test automatic access doors in power-off and emergency modes",
        "summary": "Accessibility provisions address automatic and power-assisted doors with power on and off, controls, and some breakout openings. Coordinate access control with the full door assembly.",
        "format": {
            "slug": "checklist",
            "name": "Checklist"
        },
        "priority": {
            "slug": "important",
            "name": "Important"
        },
        "featured": false,
        "image": {
            "theme": "physical-security",
            "label": "Physical security",
            "alt": "Integrated video surveillance and controlled entry at a modern commercial facility.",
            "card_url": "https://update.dsesecurity.com/assets/editorial/physical-security-card.webp?v=1.8.20",
            "hero_url": "https://update.dsesecurity.com/assets/editorial/physical-security-hero.webp?v=1.8.20",
            "social_url": "https://update.dsesecurity.com/assets/editorial/physical-security-social-v2.jpg?v=1.8.20",
            "width": 2400,
            "height": 1350
        },
        "topics": [
            {
                "slug": "access-control",
                "name": "Access Control",
                "url": "https://update.dsesecurity.com/topic/access-control/"
            },
            {
                "slug": "business-continuity",
                "name": "Business Continuity",
                "url": "https://update.dsesecurity.com/topic/business-continuity/"
            }
        ],
        "author": {
            "name": "DSE Security Editorial Team",
            "url": "https://update.dsesecurity.com/#editorial-team",
            "type": "Organization"
        },
        "publisher": {
            "name": "Detection Systems & Engineering",
            "url": "https://dsesecurity.com/"
        },
        "published_at": "2026-08-25T21:35:51+00:00",
        "modified_at": "2026-08-25T21:36:17+00:00",
        "reviewed_on": "2026-08-25",
        "reading_minutes": 2,
        "word_count": 433,
        "potentially_affected": "Entrances combining automatic or power-assisted operators with card readers, locks, request-to-exit devices, fire alarm interfaces, or standby power.",
        "dse_recommendation": "Commission the complete doorway in normal, power-loss, standby, fire-alarm, and approved emergency states with accessibility and life-safety authorities involved.",
        "primary_source": {
            "name": "2010 ADA Standards, Section 404.3 — Automatic and Power-Assisted Doors and Gates",
            "url": "https://www.access-board.gov/ada/chapter/ch04/#4043-automatic-and-power-assisted-doors-and-gates",
            "published_on": null,
            "authority": "www.access-board.gov"
        },
        "publishing_principles": "https://update.dsesecurity.com/updates/dse-updates-editorial-methodology/",
        "usage_info": "https://update.dsesecurity.com/usage/",
        "copyright_notice": "Copyright © 2026 Detection Systems & Engineering. All rights reserved.",
        "content_html": "<p><strong>Bottom line:</strong> a powered opening test does not accept an automatic access-controlled doorway. The assembly must be evaluated in the power and emergency states that alter operator, lock, sensor, breakout, and egress behavior.</p>\n<h2>Source fact: the ADA standards address powered and unpowered conditions</h2>\n<p>Section 404.3 of the <a href=\"https://www.access-board.gov/ada/chapter/ch04/#4043-automatic-and-power-assisted-doors-and-gates\" target=\"_blank\" rel=\"noopener noreferrer\">2010 ADA Standards — Automatic and Power-Assisted Doors and Gates</a> addresses automatic and power-assisted doors and gates. It includes clear-width requirements with power on and off, placement of manually operated controls outside the door swing, and a breakout-opening requirement in specified egress situations when standby power is absent. It also references standards for automatic and power-assisted pedestrian doors.</p>\n<p>Those provisions make the access-control system one component of a regulated opening. Lock release, operator power, door swing, sensors, and emergency interfaces must be tested as an integrated assembly.</p>\n<h2>Source boundary and applicability</h2>\n<p>The Access Board page is an authoritative accessibility source, but it is not a complete code analysis or approval for a specific doorway. Enforceable ADA requirements, adopted building and fire codes, referenced door standards, occupancy, egress role, local amendments, and the authority having jurisdiction determine applicability. This article is not legal or code advice.</p>\n<h2>Applicability questions</h2>\n<ul>\n<li>Is the opening part of an accessible route or required means of egress?</li>\n<li>What operator, lock, latch, closer, sensor, and access-control equipment form the assembly?</li>\n<li>Is standby power provided, and which components remain energized?</li>\n<li>What states are commanded by fire alarm, emergency release, lockdown, or power failure?</li>\n<li>Can required controls be reached without entering the moving door&#8217;s swing or hazard zone?</li>\n</ul>\n<h2>DSE recommendation: commission a doorway state matrix</h2>\n<p><em>The following steps are DSE recommendations based on the cited source.</em></p>\n<p>Have the architect, door specialist, access-control designer, accessibility lead, fire/life-safety authority, and owner identify applicable requirements. Create a matrix for normal access, authorized activation, denied access, loss of building power, standby power, fire alarm, emergency release, lockdown where permitted, and restoration. For each state, define operator motion, lock and latch condition, clear width, manual force, breakout behavior, alarm, monitoring, and responsible authority.</p>\n<p>Test with approved procedures that do not compromise occupied-building egress. Verify that restoration does not leave the door unlocked, trapped, faulted, or moving unexpectedly. Correct one system only after checking its effect on the complete opening.</p>\n<h2>Verification and evidence</h2>\n<p>Retain approved drawings, hardware and power schedules, applicable-code determination, state matrix, inspection and test reports, measurements, alarm and PACS logs, video of test motion where authorized, deficiency tickets, and authority sign-off. Re-test after changes to locks, operators, controls, fire alarm, standby power, or software logic.</p>\n<h2>Official references</h2>\n<ul>\n<li><a href=\"https://www.access-board.gov/ada/chapter/ch04/#4043-automatic-and-power-assisted-doors-and-gates\" target=\"_blank\" rel=\"noopener noreferrer\">2010 ADA Standards, Section 404.3 — Automatic and Power-Assisted Doors and Gates</a> &#8211; United States Access Board</li>\n</ul>",
        "content_text": "Bottom line: a powered opening test does not accept an automatic access-controlled doorway. The assembly must be evaluated in the power and emergency states that alter operator, lock, sensor, breakout, and egress behavior.\nSource fact: the ADA standards address powered and unpowered conditions\nSection 404.3 of the 2010 ADA Standards — Automatic and Power-Assisted Doors and Gates addresses automatic and power-assisted doors and gates. It includes clear-width requirements with power on and off, placement of manually operated controls outside the door swing, and a breakout-opening requirement in specified egress situations when standby power is absent. It also references standards for automatic and power-assisted pedestrian doors.\nThose provisions make the access-control system one component of a regulated opening. Lock release, operator power, door swing, sensors, and emergency interfaces must be tested as an integrated assembly.\nSource boundary and applicability\nThe Access Board page is an authoritative accessibility source, but it is not a complete code analysis or approval for a specific doorway. Enforceable ADA requirements, adopted building and fire codes, referenced door standards, occupancy, egress role, local amendments, and the authority having jurisdiction determine applicability. This article is not legal or code advice.\nApplicability questions\n\nIs the opening part of an accessible route or required means of egress?\nWhat operator, lock, latch, closer, sensor, and access-control equipment form the assembly?\nIs standby power provided, and which components remain energized?\nWhat states are commanded by fire alarm, emergency release, lockdown, or power failure?\nCan required controls be reached without entering the moving door’s swing or hazard zone?\n\nDSE recommendation: commission a doorway state matrix\nThe following steps are DSE recommendations based on the cited source.\nHave the architect, door specialist, access-control designer, accessibility lead, fire/life-safety authority, and owner identify applicable requirements. Create a matrix for normal access, authorized activation, denied access, loss of building power, standby power, fire alarm, emergency release, lockdown where permitted, and restoration. For each state, define operator motion, lock and latch condition, clear width, manual force, breakout behavior, alarm, monitoring, and responsible authority.\nTest with approved procedures that do not compromise occupied-building egress. Verify that restoration does not leave the door unlocked, trapped, faulted, or moving unexpectedly. Correct one system only after checking its effect on the complete opening.\nVerification and evidence\nRetain approved drawings, hardware and power schedules, applicable-code determination, state matrix, inspection and test reports, measurements, alarm and PACS logs, video of test motion where authorized, deficiency tickets, and authority sign-off. Re-test after changes to locks, operators, controls, fire alarm, standby power, or software logic.\nOfficial references\n\n2010 ADA Standards, Section 404.3 — Automatic and Power-Assisted Doors and Gates – United States Access Board",
        "content_markdown": "Bottom line: a powered opening test does not accept an automatic access-controlled doorway. The assembly must be evaluated in the power and emergency states that alter operator, lock, sensor, breakout, and egress behavior.\n\n## Source fact: the ADA standards address powered and unpowered conditions\n\nSection 404.3 of the [2010 ADA Standards — Automatic and Power-Assisted Doors and Gates](https://www.access-board.gov/ada/chapter/ch04/#4043-automatic-and-power-assisted-doors-and-gates) addresses automatic and power-assisted doors and gates. It includes clear-width requirements with power on and off, placement of manually operated controls outside the door swing, and a breakout-opening requirement in specified egress situations when standby power is absent. It also references standards for automatic and power-assisted pedestrian doors.\n\nThose provisions make the access-control system one component of a regulated opening. Lock release, operator power, door swing, sensors, and emergency interfaces must be tested as an integrated assembly.\n\n## Source boundary and applicability\n\nThe Access Board page is an authoritative accessibility source, but it is not a complete code analysis or approval for a specific doorway. Enforceable ADA requirements, adopted building and fire codes, referenced door standards, occupancy, egress role, local amendments, and the authority having jurisdiction determine applicability. This article is not legal or code advice.\n\n## Applicability questions\n\n- Is the opening part of an accessible route or required means of egress?\n\n- What operator, lock, latch, closer, sensor, and access-control equipment form the assembly?\n\n- Is standby power provided, and which components remain energized?\n\n- What states are commanded by fire alarm, emergency release, lockdown, or power failure?\n\n- Can required controls be reached without entering the moving door’s swing or hazard zone?\n\n## DSE recommendation: commission a doorway state matrix\n\nThe following steps are DSE recommendations based on the cited source.\n\nHave the architect, door specialist, access-control designer, accessibility lead, fire/life-safety authority, and owner identify applicable requirements. Create a matrix for normal access, authorized activation, denied access, loss of building power, standby power, fire alarm, emergency release, lockdown where permitted, and restoration. For each state, define operator motion, lock and latch condition, clear width, manual force, breakout behavior, alarm, monitoring, and responsible authority.\n\nTest with approved procedures that do not compromise occupied-building egress. Verify that restoration does not leave the door unlocked, trapped, faulted, or moving unexpectedly. Correct one system only after checking its effect on the complete opening.\n\n## Verification and evidence\n\nRetain approved drawings, hardware and power schedules, applicable-code determination, state matrix, inspection and test reports, measurements, alarm and PACS logs, video of test motion where authorized, deficiency tickets, and authority sign-off. Re-test after changes to locks, operators, controls, fire alarm, standby power, or software logic.\n\n## Official references\n\n- [2010 ADA Standards, Section 404.3 — Automatic and Power-Assisted Doors and Gates](https://www.access-board.gov/ada/chapter/ch04/#4043-automatic-and-power-assisted-doors-and-gates) – United States Access Board"
    },
    "json_ld": {
        "@context": "https://schema.org",
        "@graph": [
            {
                "@type": "Organization",
                "@id": "https://dsesecurity.com/#organization",
                "name": "Detection Systems & Engineering",
                "alternateName": "DSE Security",
                "url": "https://dsesecurity.com/",
                "logo": {
                    "@type": "ImageObject",
                    "url": "https://update.dsesecurity.com/assets/dse-logo-20260812.png?v=1.8.20"
                }
            },
            {
                "@type": "Organization",
                "@id": "https://update.dsesecurity.com/#editorial-team",
                "name": "DSE Security Editorial Team",
                "url": "https://update.dsesecurity.com/",
                "parentOrganization": {
                    "@id": "https://dsesecurity.com/#organization"
                }
            },
            {
                "@type": "WebSite",
                "@id": "https://update.dsesecurity.com/#website",
                "name": "DSE Updates",
                "alternateName": "DSE Security Knowledge Hub",
                "url": "https://update.dsesecurity.com/",
                "inLanguage": "en-US",
                "publisher": {
                    "@id": "https://dsesecurity.com/#organization"
                },
                "potentialAction": {
                    "@type": "SearchAction",
                    "target": {
                        "@type": "EntryPoint",
                        "urlTemplate": "https://update.dsesecurity.com/?q={search_term_string}"
                    },
                    "query-input": "required name=search_term_string"
                }
            },
            {
                "@type": "WebPage",
                "@id": "https://update.dsesecurity.com/updates/test-automatic-access-doors-in-power-off-and-emergency-modes/",
                "url": "https://update.dsesecurity.com/updates/test-automatic-access-doors-in-power-off-and-emergency-modes/",
                "isPartOf": {
                    "@id": "https://update.dsesecurity.com/#website"
                },
                "lastReviewed": "2026-08-25"
            },
            {
                "@type": "BreadcrumbList",
                "@id": "https://update.dsesecurity.com/updates/test-automatic-access-doors-in-power-off-and-emergency-modes/#breadcrumbs",
                "itemListElement": [
                    {
                        "@type": "ListItem",
                        "position": 1,
                        "name": "DSE Updates",
                        "item": "https://update.dsesecurity.com/"
                    },
                    {
                        "@type": "ListItem",
                        "position": 2,
                        "name": "Test automatic access doors in power-off and emergency modes",
                        "item": "https://update.dsesecurity.com/updates/test-automatic-access-doors-in-power-off-and-emergency-modes/"
                    }
                ]
            },
            {
                "@type": [
                    "Article",
                    "TechArticle"
                ],
                "@id": "https://update.dsesecurity.com/updates/test-automatic-access-doors-in-power-off-and-emergency-modes/#article",
                "identifier": "https://update.dsesecurity.com/updates/test-automatic-access-doors-in-power-off-and-emergency-modes/",
                "url": "https://update.dsesecurity.com/updates/test-automatic-access-doors-in-power-off-and-emergency-modes/",
                "headline": "Test automatic access doors in power-off and emergency modes",
                "description": "Accessibility provisions address automatic and power-assisted doors with power on and off, controls, and some breakout openings. Coordinate access…",
                "abstract": "Accessibility provisions address automatic and power-assisted doors with power on and off, controls, and some breakout openings. Coordinate access control with the full door assembly.",
                "articleBody": "Bottom line: a powered opening test does not accept an automatic access-controlled doorway. The assembly must be evaluated in the power and emergency states that alter operator, lock, sensor, breakout, and egress behavior.\nSource fact: the ADA standards address powered and unpowered conditions\nSection 404.3 of the 2010 ADA Standards — Automatic and Power-Assisted Doors and Gates addresses automatic and power-assisted doors and gates. It includes clear-width requirements with power on and off, placement of manually operated controls outside the door swing, and a breakout-opening requirement in specified egress situations when standby power is absent. It also references standards for automatic and power-assisted pedestrian doors.\nThose provisions make the access-control system one component of a regulated opening. Lock release, operator power, door swing, sensors, and emergency interfaces must be tested as an integrated assembly.\nSource boundary and applicability\nThe Access Board page is an authoritative accessibility source, but it is not a complete code analysis or approval for a specific doorway. Enforceable ADA requirements, adopted building and fire codes, referenced door standards, occupancy, egress role, local amendments, and the authority having jurisdiction determine applicability. This article is not legal or code advice.\nApplicability questions\n\nIs the opening part of an accessible route or required means of egress?\nWhat operator, lock, latch, closer, sensor, and access-control equipment form the assembly?\nIs standby power provided, and which components remain energized?\nWhat states are commanded by fire alarm, emergency release, lockdown, or power failure?\nCan required controls be reached without entering the moving door’s swing or hazard zone?\n\nDSE recommendation: commission a doorway state matrix\nThe following steps are DSE recommendations based on the cited source.\nHave the architect, door specialist, access-control designer, accessibility lead, fire/life-safety authority, and owner identify applicable requirements. Create a matrix for normal access, authorized activation, denied access, loss of building power, standby power, fire alarm, emergency release, lockdown where permitted, and restoration. For each state, define operator motion, lock and latch condition, clear width, manual force, breakout behavior, alarm, monitoring, and responsible authority.\nTest with approved procedures that do not compromise occupied-building egress. Verify that restoration does not leave the door unlocked, trapped, faulted, or moving unexpectedly. Correct one system only after checking its effect on the complete opening.\nVerification and evidence\nRetain approved drawings, hardware and power schedules, applicable-code determination, state matrix, inspection and test reports, measurements, alarm and PACS logs, video of test motion where authorized, deficiency tickets, and authority sign-off. Re-test after changes to locks, operators, controls, fire alarm, standby power, or software logic.\nOfficial references\n\n2010 ADA Standards, Section 404.3 — Automatic and Power-Assisted Doors and Gates – United States Access Board",
                "datePublished": "2026-08-25T21:35:51+00:00",
                "dateModified": "2026-08-25T21:36:17+00:00",
                "mainEntityOfPage": {
                    "@id": "https://update.dsesecurity.com/updates/test-automatic-access-doors-in-power-off-and-emergency-modes/"
                },
                "inLanguage": "en-US",
                "isAccessibleForFree": true,
                "author": {
                    "@type": "Organization",
                    "name": "DSE Security Editorial Team",
                    "url": "https://update.dsesecurity.com/#editorial-team"
                },
                "publisher": {
                    "@id": "https://dsesecurity.com/#organization"
                },
                "image": {
                    "@type": "ImageObject",
                    "@id": "https://update.dsesecurity.com/updates/test-automatic-access-doors-in-power-off-and-emergency-modes/#primaryimage",
                    "url": "https://update.dsesecurity.com/assets/editorial/physical-security-social-v2.jpg?v=1.8.20",
                    "contentUrl": "https://update.dsesecurity.com/assets/editorial/physical-security-social-v2.jpg?v=1.8.20",
                    "width": 1200,
                    "height": 630,
                    "caption": "Test automatic access doors in power-off and emergency modes"
                },
                "articleSection": [
                    "Access Control",
                    "Business Continuity"
                ],
                "keywords": [
                    "Access Control",
                    "Business Continuity",
                    "Checklist",
                    "Important priority"
                ],
                "genre": "Checklist",
                "about": [
                    {
                        "@type": "Thing",
                        "name": "Access Control",
                        "url": "https://update.dsesecurity.com/topic/access-control/"
                    },
                    {
                        "@type": "Thing",
                        "name": "Business Continuity",
                        "url": "https://update.dsesecurity.com/topic/business-continuity/"
                    }
                ],
                "wordCount": 433,
                "timeRequired": "PT2M",
                "publishingPrinciples": "https://update.dsesecurity.com/updates/dse-updates-editorial-methodology/",
                "usageInfo": "https://update.dsesecurity.com/usage/",
                "copyrightHolder": {
                    "@id": "https://dsesecurity.com/#organization"
                },
                "copyrightNotice": "Copyright © 2026 Detection Systems & Engineering. All rights reserved.",
                "citation": {
                    "@type": "CreativeWork",
                    "name": "2010 ADA Standards, Section 404.3 — Automatic and Power-Assisted Doors and Gates",
                    "url": "https://www.access-board.gov/ada/chapter/ch04/#4043-automatic-and-power-assisted-doors-and-gates"
                }
            }
        ]
    }
}