# Turn walking-surface inspections into tracked facility repairs > Use 29 CFR 1910.22 - General requirements to review this narrow operational decision without extending the source beyond its stated scope. - Canonical URL: https://update.dsesecurity.com/updates/turn-walking-surface-inspections-into-tracked-facility-repairs/ - Publisher: Detection Systems & Engineering (DSE Security) - Author: DSE Security Editorial Team - Published: 2026-08-27T12:12:35+00:00 - Modified: 2026-08-27T13:04:10+00:00 - Last reviewed by DSE: 2026-08-26 - Resource type: Briefing - DSE priority: Advisory - Topics: Access Control, Business Continuity, Cybersecurity - Reading time: 3 minutes ## What you need to know Use 29 CFR 1910.22 - General requirements to review this narrow operational decision without extending the source beyond its stated scope. ## Potentially affected Teams, systems, services, or facilities within the stated scope of 29 CFR 1910.22 - General requirements ## DSE recommendation Compare the observed state with the cited official source, document applicability and exceptions, and test any approved change with rollback safeguards. ## Article Use this document to resolve one bounded operational decision: Turn walking-surface inspections into tracked facility repairs. Only the official source and traced locations below supply facts. Confirm applicability before acting. ## Source fact: The official [29 CFR 1910.22 – General requirements](https://www.ecfr.gov/current/title-29/section-1910.22) from Occupational Safety and Health Administration via eCFR supports the following bounded statements: - Under 29 CFR 1910, the rule requires that the employer ensure hazardous conditions on walking-working surfaces are corrected or repaired before an employee uses the walking-working surface again. The research record locates this support at 29 CFR 1910.22(d)(2), read with 29 CFR 1910.22(d) (eCFR anchor p-1910.22(d)(2)). - Under 29 CFR 1910, the rule requires that the employer ensure walking-working surfaces are inspected, regularly and as necessary, and maintained in a safe condition. The research record locates this support at 29 CFR 1910.22(d)(1), read with 29 CFR 1910.22(d) (eCFR anchor p-1910.22(d)(1)). Only the traced statements above are asserted as source facts. Apply the review to critical rooms, power, cooling, water, fire protection, alternate sites, physical barriers, and documented recovery paths after confirming that the source and deployed context match. ## What the source does not establish Federal workplace rule; determine coverage, state-plan requirements, site conditions, and competent-person responsibilities before treating it as a complete inspection program. Do not read the source as proof of implementation or permission to change production. Its guidance remains conditional on identity and access control, Windows DNS where networked services use it, time, communications, utilities, life-safety systems, vendors, and authorized responders and the environment’s recorded constraints. ## Applicability questions - For source statement 1 at 29 CFR 1910.22(d)(2), read with 29 CFR 1910.22(d) (eCFR anchor p-1910.22(d)(2)), which observable configuration, record, or test can confirm applicability here? - For source statement 2 at 29 CFR 1910.22(d)(1), read with 29 CFR 1910.22(d) (eCFR anchor p-1910.22(d)(1)), which observable configuration, record, or test can confirm applicability here? - Which deployed instance of critical rooms, power, cooling, water, fire protection, alternate sites, physical barriers, and documented recovery paths will be compared with the source, and why that instance? - How will the review distinguish a source mismatch from a failure in identity and access control, Windows DNS where networked services use it, time, communications, utilities, life-safety systems, vendors, and authorized responders? - Who approves the conclusion, exception, test window, and rollback threshold? ## DSE recommendation: DSE recommends using the cited source as the evidence anchor for this decision. Begin by recording scope and current state before deciding whether a change is warranted. Record the source location, examined part of critical rooms, power, cooling, water, fire protection, alternate sites, physical barriers, and documented recovery paths, observed and expected states, owner, and reason for deviation. An implementation decision needs an owner, approved window, prechecks, observable outcome, stop authority, and rollback path. Validate identity and access control, Windows DNS where networked services use it, time, communications, utilities, life-safety systems, vendors, and authorized responders before and after the test, and store only sanitized operational evidence. ## Verification and evidence A reviewer should be able to retrace the decision from 29 CFR 1910.22(d)(2), read with 29 CFR 1910.22(d) (eCFR anchor p-1910.22(d)(2)); 29 CFR 1910.22(d)(1), read with 29 CFR 1910.22(d) (eCFR anchor p-1910.22(d)(1)) through facility inventories, inspection records, alarm and shutdown tests, maintenance history, recovery exercises, and corrective actions. Record what was collected, where, when, by whom, and which system or role it represents. Retain the starting state, authorization, execution record, outcome, deviation, and final state as one review package. Move disruptive checks to an approved test path. Reopen the decision when versions, design, dependencies, ownership, or official guidance changes. ## Official references - [29 CFR 1910.22 – General requirements](https://www.ecfr.gov/current/title-29/section-1910.22) — Occupational Safety and Health Administration via eCFR ## Primary reference - Name: 29 CFR 1910.22 - General requirements - Authority: www.ecfr.gov - URL: https://www.ecfr.gov/current/title-29/section-1910.22 - Source publication date: Not stated by the source ## Citation and use Preferred citation: “Turn walking-surface inspections into tracked facility repairs,” DSE Security, https://update.dsesecurity.com/updates/turn-walking-surface-inspections-into-tracked-facility-repairs/ Publishing principles: https://update.dsesecurity.com/updates/dse-updates-editorial-methodology/ Usage and citation policy: https://update.dsesecurity.com/usage/ Copyright © 2026 Detection Systems & Engineering. All rights reserved.