Maintain a regulated stationary-source emergency-response program and keep it current

Use 40 CFR 68.95 -- Chemical Accident Prevention Provisions to review this narrow operational decision without extending the source beyond its stated scope.

Paired infrastructure paths converging on a stable recovered service.
DSE visual intelligenceContinuity & recoveryGuide · 3 min read
Executive summary

What you need to know

Use 40 CFR 68.95 -- Chemical Accident Prevention Provisions to review this narrow operational decision without extending the source beyond its stated scope.

Potentially affected

Teams, systems, services, or facilities within the stated scope of 40 CFR 68.95 -- Chemical Accident Prevention Provisions

DSE recommendation

Compare the observed state with the cited official source, document applicability and exceptions, and test any approved change with rollback safeguards.

Use this document to connect an official requirement or behavior to observable evidence: Maintain a regulated stationary-source emergency-response program and keep it current. Only the official source and traced locations below supply facts. Confirm applicability before acting.

Source fact:

The official 40 CFR 68.95 — Chemical Accident Prevention Provisions from Environmental Protection Agency via eCFR supports the following bounded statements:

  • Under 40 CFR 68, the emergency response plan maintained at the stationary source must include procedures and measures for responding after an accidental release of a regulated substance. The research record locates this support at 40 CFR 68.95(a)(1)(iii), read with 40 CFR 68.95(a)(1) (eCFR anchor p-68.95(a)(1)(iii)).
  • Under 40 CFR 68, the owner or operator must update the plan for source changes or new information from coordination, exercises, investigations, or other sources and inform employees of the changes. The research record locates this support at 40 CFR 68.95(a)(4) (eCFR anchor p-68.95(a)(4)).

Do not import neighboring assumptions into the source record. The supported task is a scoped comparison involving essential functions, upstream providers, recovery sequences, alternate work paths, and tested recovery objectives and the conditions the source actually describes.

What the source does not establish

Applies only to stationary sources and processes subject to 40 CFR part 68 and the applicable program level. Confirm coverage, regulated substances, process conditions, and current EPA requirements; this is not legal advice or a universal emergency-management standard. A correct source interpretation can still be inapplicable to a particular design. Confirm identity, DNS, communications, facilities, suppliers, and the people authorized to invoke recovery, ownership, and change authority instead of treating documented behavior as a deployment guarantee.

Applicability questions

  • For source statement 1 at 40 CFR 68.95(a)(1)(iii), read with 40 CFR 68.95(a)(1) (eCFR anchor p-68.95(a)(1)(iii)), which observable configuration, record, or test can confirm applicability here?
  • For source statement 2 at 40 CFR 68.95(a)(4) (eCFR anchor p-68.95(a)(4)), which observable configuration, record, or test can confirm applicability here?
  • Which owner can attest to the recorded state of essential functions, upstream providers, recovery sequences, alternate work paths, and tested recovery objectives, including exceptions?
  • What baseline for identity, DNS, communications, facilities, suppliers, and the people authorized to invoke recovery must accompany the source-specific observation?
  • Which success, stop, and escalation criteria are written before testing begins?

DSE recommendation:

DSE recommends using the cited source as the evidence anchor for this decision. Use a two-person review for the source interpretation and the resulting operational decision. Record the source location, examined part of essential functions, upstream providers, recovery sequences, alternate work paths, and tested recovery objectives, observed and expected states, owner, and reason for deviation.

Translate the conclusion into change control only after documenting dependencies, impact, test method, expected signals, failure signals, and restoration steps. Include identity, DNS, communications, facilities, suppliers, and the people authorized to invoke recovery, while excluding secrets and sensitive personal or topology data from ordinary tickets.

Verification and evidence

Keep the source locations 40 CFR 68.95(a)(1)(iii), read with 40 CFR 68.95(a)(1) (eCFR anchor p-68.95(a)(1)(iii)); 40 CFR 68.95(a)(4) (eCFR anchor p-68.95(a)(4)) adjacent to the sanitized artifacts used for comparison. Prefer business-impact records, dependency maps, exercise results, recovery timings, and open corrective actions, with enough identity and timing data for an independent recheck.

Record the decision even when no change is made, including uncertainty and the next trigger. Use safe testing conditions for disruptive work, preserve rollback proof, and revisit the conclusion after relevant platform, dependency, vendor, or ownership changes.

Official references

Primary reference

Review the official source

40 CFR 68.95 -- Chemical Accident Prevention Provisions · Verified August 26, 2026

Open official reference ↗
Plan the next step

Need help applying this guidance safely?

DSE can help confirm applicability, protect service continuity, and validate the result across physical security and IT systems.

Talk with DSE